If you have an old foam mattress you no longer need, upcycle it into a delightful DIY ottoman.
I wanted a pouffe for my living room but couldn’t afford to buy one.
And I had an old IKEA foam mattress sitting behind my couch, taking up room.
I was going to dump it when I thought of using it for this project.
It was a win-win. I had my pouffe ottoman and “got rid” of the spare mattress in one project.
IKEA items used:
Other materials and tools:
- Pallet wood
- Scrap wood
- Staple gun
DIY pallet ottoman instructions:
1. Cut pallet to size with a jigsaw.
2. Then, cut scrap wood to size and nail to bottom of pallet creating a frame to staple fabric to.
3. Measure top of pallet and cut foam mattress to fit. I used a pruning saw for this as the mattress was very thick. I used a double layer of foam for comfort and sturdiness.
4. Place foam on top of pallet and position bedsheet on top so that there’s enough fabric to go under the pallet. This will be stapled to the bottom and form an under-layer.
Draw a rough outline of foam on the sheet and then flip the whole lot –sheet on the floor, mattress on top, pallet on top of mattress. I had help from my cats for this step!
5. Staple the sheet to one side of the pallet, then pull tight and staple to the opposite side. Do the same for the remaining 2 sides. Tuck in and trim fabric for the corners (this can be a bit tricky!).
6. Flip the ottoman over and make sure fabric is tight and even. Now do the same for the fabric you will use as the final covering.
I used the stunning pink fabric with hands and birds by Kristine Mandsberg, which I got in IKEA several years ago. I had been using it as a backdrop to my bed but changed my decor and it sat in the cupboard for years before being used for this ottoman.
7. The final step which I have yet to do is to find and attach feet to the ottoman, however it functions perfectly without them.
How long and how much did it cost?
About 8 hours total and cost €5 for the staples! I had everything else at home.
What do you like most about the DIY ottoman?
The fabric I used is like a piece of art and the ottoman is sturdy and comfortable enough to be used as extra seating.
What was the hardest part about this hack?
Folding the fabric for the corners!
What to pay special attention to?
I’m delighted with how it turned out. And I’ve received lots of lovely compliments and a request to make some for others!
~ by RuthO’Sullivan
The post Ruth’s upcycled DIY ottoman is a win for her living room appeared first on IKEA Hackers.
This content was originally published here.